2808 Motor & Accessories Scroll Down to view all of the items. Complete 2808 Power System Combo This combo includes one Himax 2808-1160 motor, 18 amp brushless speed control, Motor mount hardware, APC 7-4 SF Propeller, 6" Black Velcro, 3/16" heat shrink tubing and Deans Ultra Style Male Connector. Soldering required. P/N: AE-021    Our Low Price: $87.99 2808 Motor & E.S.C. Combo This combo includes the Himax 2808-1160 motor and an 18 amp brushless speed control. Soldering required.  P/N: AE-020    Our Low Price: $78.99 HIMAX HC-2808-1160 Brushless Motor Himax Brushless Outrunner Motors are manufactured to high standards for the discerning modeler. Designed for light-weight, high efficiency, high torque, and durability Himax Outrunner motors are sure to make today’s radio controlled models perform. Please read the entire operating manual to ensure correct functionality and best performance. The HC2808 series motor is made for small to medium size models weighing 6 to 16 ounces. Soldering Required. DOWNLOAD THE HIMAX 2808-1160 INSTRUCTION MANUAL HERE Specifications: Weight: HC2808 Series 52g, (1.83oz), Motor with stick mount Max Power: HC2808 Series 110W, (This is dependent on several factors) Max RPM: 20,000 RPM Diameter: 27.8mm, (1.09”) Length: 24.7mm, (.97”) Shaft Diameter: 4.0mm (.1575”) Mounting Screw Thread: 2.5mm, max depth 4.5mm, on 16mm, (.625”) bolt circle Maximum Case Temperature: 65oC, (149oF) Electrical Specifications:HC2808-1160 Kv = 1160, Rm = .150, Io = 0.6, Efficient Operating Current = 5-11A, 15A Max 15 seconds For warranty, service and repair information please directly contact Maxx Products International. P/N: AE-018    Our Low Price: $45.99  Castle Creation's Thunderbird-18 Brushless ESC The Thunderbird 18 is a small, light weight micro brushless speed control. The Thunderbird 18 features a Battery Eliminator Circuit (BEC): eliminates receiver battery, Safe "Power On", Microprocessor Controlled, Tough surface mount construction, Audible Arming Signal, Auto Motor cut-off with reset, Low torque "Soft Start": protects gear boxes and belt drives from shock, Smooth reverse exponential throttle, Self-calibrating endpoints: maximizes usable stick travel, Auto shut-down when signal is lost, Simple setup: no complicated switches or wiring. FOR BRUSHLESS MOTORS ONLY. Soldering Required. DOWNLOAD THE CASTLE CREATIONS THUNDERBIRD 18 INSTRUCTION MANUAL HERE Electrical Specifications: Max amps: 18 Max volts: 15 volts, 3S Lipo, 12 NiCad/NiMh BEC: Linear regulator 3 amp max Length: 1.32" (33.7mm) Width: 0.9" (23.1mm) Height: 0.34" (8.6mm) Weight: 0.6 oz (17g) Brake: On/Off. Defaulted to AUTO LIPO detect and no brake. For warranty, service and repair information please directly contact Castle Creations.  P/N: AE-019    Our Low Price: $33.99 2808 Motor Mount Hardware Mounting set for the Himax 2808 motors. Includes aluminum spacer tubes and 4-40 mounting bolts. Package contains 1 set mounting hardware. P/N: AE-022    Our Low Price: $1.99 APC 7 X 4 SF Propeller High thrust molded nylon propeller. Our standard prop for the Himax 2808 motor. Fits 6mm shaft. Package contains 1 propeller. P/N: AE-023    Our Low Price: $2.13 APC 7 X 5 SF Propeller High thrust molded nylon propeller. Our higher thrust optional prop for the Himax 2808 motor. Fits 6mm shaft. Package contains 1 propeller.  P/N: AE-024    Our Low Price: $2.13 APC 7 X 6 SF Propeller High thrust molded nylon propeller. Our higher thrust optional prop for the Himax 2808 motor. Fits 6mm shaft. Package contains 1 propeller.  P/N: AE-025    Our Low Price: $2.13 Bullet Style 2808 Prop Adaptor Precision machined aluminum prop adaptor for the Himax 2808 and other motors. Fits 4mm motor shaft. Fits 6mm propellers. Contains one adaptor. P/N: AE-026    Our Low Price: $4.50 6" Velcro Black Velcro hook and loop fastener tape to secure components to your model. Contains enough to attach a receiver, speed control and battery pack. Use medium C/A glue to secure to model & components. Contains one 6" pair. P/N: AE-012    Our Low Price: $2.49 Dean's Ultra Style Connector Male Standard electrical connector used on high power. Tough plastic construction with gold plated connectors. The male Deans Ultra Style connector is used on Speed Controls. Can also be used to make battery and charger adaptor cables. Contains two connectors. P/N: AE-027   Our Low Price: $3.99 Dean's Ultra Style Connector Female Standard electrical connector used on high power. Tough plastic construction with gold plated connectors. The female Deans Ultra Style connector is used on Battery Packs. Can also be used to make battery and charger adaptor cables. Contains two connectors. P/N: AE-028    Our Low Price: $2.99 3/16" Heat Shrink Tube High performance "2 to 1" Standard Wall Polyolefin, Black Heat Shrink Tubing. Shrinks evenly to produce a tight fit. Shrinks up to 50% of its original size. 3/16" I.D. shrinks to 3/32" I.D. Contains two 4" pieces. P/N: AE-029    Our Low Price: $1.39 1/4" Heat Shrink Tube High performance "2 to 1" Standard Wall Polyolefin, Black Heat Shrink Tubing. Shrinks evenly to produce a tight fit. Shrinks up to 50% of its original size. 1/4" I.D. shrinks to 1/8" I.D. Contains two 4" pieces. P/N: AE-030    Our Low Price: $1.39 1/16" Heat Shrink Tube High performance "2 to 1" Standard Wall Polyolefin, Black Heat Shrink Tubing. Shrinks evenly to produce a tight fit. Shrinks up to 50% of its original size. 1/16" I.D. shrinks to 1/32" I.D. Contains two 4" pieces. P/N: AE-015    Our Low Price: $1.39 3/32" Heat Shrink Tube High performance "2 to 1" Standard Wall Polyolefin, Black Heat Shrink Tubing. Shrinks evenly to produce a tight fit. Shrinks up to 50% of its original size. 3/32" I.D. shrinks to 3/64" I.D. Contains two 4" pieces. P/N: AE-016    Our Low Price: $1.39 1/8" Heat Shrink Tube High performance "2 to 1" Standard Wall Polyolefin, Black Heat Shrink Tubing. Shrinks evenly to produce a tight fit. Shrinks up to 50% of its original size. 1/8" I.D. shrinks to 1/16" I.D. Contains two 4" pieces. P/N: AE-017    Our Low Price: $1.39   All Content Copyright © 2009 - 2011 Alien Aircraft Corp. Designed and Maintained by Tom Herr